Energy

 

17 Results were found on Technologies

Leading Researchers:
9-2007-79

Miniature Air Vehicle Controlled and Propelled by Active Flow Control

Miniature Air Vehicles (MAV’s) with Active Flow Control (AFC) is an aviation invention in which the means for thrust generation, flight control and lift augmentation are created by the same fluidic actuators, located within the MAV.  This can solve many of the problems that inhibit further development of the field. The most compelling reason for […] Read More >

Leading Researchers:
9-2011-239

Flexible Blade Rheometer

The innovation is a low-cost flexible extension to the standard off-the-shelf rotational blade rheometer. State of the art rotational rheometers use fixed and rigid blades, which rotate against a fluid and have limited accuracy at extremely high or low viscosities.  Our inventions replaces the rigid blades with flexible blades work by utilizing fluid mechanics and […] Read More >

Leading Researchers:
6-2012-299

Improving Power Output in Partial Shading of Photovoltaic Panels

The Invention A controllable circuit for maximizing and stabilizing output power in PV panels under conditions of partial shading. The low cost high reliability device allows maximum power to be extracted during uneven shading conditions. Furthermore, the output power curve is quite linear without multiple peaks which makes it easy to sync several PV sources […] Read More >

Leading Researchers:
7-2012-324

Capacitive Matrix for Continuous Voltage Output

A direct current (DC) to DC converter, including: input ports for receiving an input DC voltage; output ports for outputting an output DC voltage; a first matrix of capacitors and switches;  a second matrix of capacitors and switches; and a control circuit, coupled to the switches of the first and second matrices, configure d to […] Read More >

Leading Researchers:
9-2013-548

Automatic Flow Control for increasing drag in aircraft wings

A fluidic system is disclosed. The fluidic system comprises a switching valve having a fluidic oscillatory actuator, a first blowing actuator and a second blowing actuator. The first blowing actuator is switchable by the switching valve and is configured for producing an output of fluid flow engaging a first plane. The second blowing actuator is […] Read More >

Leading Researchers:
9-2014-742

Active Flow Technology for Motor Vehicles up to 4,500 kilograms

The InventionMiniature Air Vehicles (MAV’s) with Active Flow Control (AFC) is an aviation invention in which the means for thrust generation, flight control and lift augmentation are created by the same fluidic actuators, located within the MAV.  This can solve many of the problems that inhibit further development of the field. The most compelling reason […] Read More >

Leading Researchers:
6-2015-911

Metal alloy nano-foams as Catalysts for Methane Dry Reforming during GTL

Today, about 90% of catalysts for GTL technology take the form of supported nanocatalysts. In these materials, metallic nanocrystals (the active catalytic phase) are dispersed about a highly porous ceramic oxide (inactive). These materials are advantageous because they provide exceptionally large surface areas for processing large amounts of gas, however, they all suffer from a […] Read More >

7-2016-1027

Plug-and-play realization of the virtual infinite capacitor

In high power applications, especially where AC/DC or DC/AC conversion are involved, the high voltage DC bus suffers from voltage ripples. Low frequency current smoothing is required to minimize ripple voltage on the DC bus, which may affect other circuitry connected to the bus. Voltage smoothing is required in multiple applications, including photovoltaic and wind […] Read More >

6-2019-1248

Co-deflagration synthesis of metallic, ceramic, and mixed ceramic-metallic particles

A Novel Method for Preparation of Bi-metallic Catalyst. Bimetallic catalysts have been shown to outperform their monometallic counterparts in terms of both activity and selectivity. There are now many examples of catalytic reactions (e.g CO oxidation, dehydrogenation, Fischer-Tropsch synthesis, Reforming) which are performed, on industrial scale, over bimetallic systems. The method was demonstrated by the preparation […] Read More >

Leading Researchers:
11-2019-1320

Flexible Multi-Coaxial-Cable 3D-Printed Battery

3-D printing of a battery with any shape, using multi-coaxial, cable-type 3D printable filament UNMET NEEDPrinted batteries are an excellent alternative to conventional batteries for an increasing number of applications such as radio frequency sensing, interactive packaging, medical devices, sensors, and wearable electronics. OUR SOLUTIONMulti-coaxial, cable-type 3D printable battery, in which the inner electrode (anode […] Read More >

Sorry, no results were found.

Sign up for
our events

    Close
    Life Science
    Magazine

      Close
      Hi-Tech
      Magazine

        Close